Welcome to Ardwolf

M12x1

The dimensions and construction of the CONEC Circular Connector/ SAL connector series comply with IEC 61076-2-101. Circular Connectors are used in many applications in the field of automation technology, e.g. for simple signal transmission and power transmission or for data communication in field bus technology. The series comprises connectors with integral wires and field attachable constructions with different connection types in axial and angled configurations. A comprehensive range of Sockets is available for the device.

 

Sensor Actor Line / M12 x1 Connectors with overmoulded cable

Sensor Actor Line / M12 x1 Connectors with overmoulded cable

The installation costs and time spent are drastically reduced through the use of circular M12 connectors with integral wires. The choice of material and the construction of the connector enable it to be used in a dirty and damp industrial environment. Innovative connection technology fulfilling the requirements of protection class IP67. It comes in a standard programm with overmoulded versions – naturally with anti vibration locking in various cable lenghts and quality. Components with 2 or 3 LEDs indicate operating voltage and/or the switching status. When it gets really tough: Shielded connectors from CONEC protect and by pass weak signals. A uniform cable shielding ensures seamless signal transmision.

 

Sensor Actor Line / M12 x1 Connector Sockets

Sensor Actor Line / M12 x1 Connector Sockets

Connectors and adapters are available in different pin configurations with single wires as well as pin contacts. Front mounted sockets with wires can be positioned with a coupling nut. Sockets for rear housing assembly with different length pin contacts for soldering directly on the printed circuit board complete the program. An installation socket for direct assembly on the printed circuit board is also available with a shielded connection option in an axial and angled version. A spring-loaded shield plate connects the socket housing for the M12 Connectors dirctly to the printed circuit board. All products in this series are designed for a printed board thickness of 1,6mm and a device wall thickness of 2-3mm.

 

 Sensor Actor Line / M12 x1 Field attachable Circular Connectors  

Sensor Actor Line / M12 x1 Field attachable Circular Connectors

Circular Connectors that can be assembled freely are often required for individual cable lengths, e.g. for the construction of special purpose machines. CONEC offers 4 and 5-pin M12 Connector models here in an axial and angled construction for connectors and adapters. In the angled construction the cable outlet is adjustable in a 90° pitch to the pin layout. The cables are connected via screw or clamp connections. The cable seal is produced by an elastomer section and has been designed for different cable diameters (max. 8mm). Available is a connecting area from 0.25mm2 to 0.75mm2. For rounding up the prgram there are availabe shielded versions in axial type of construction. The requirements of protection class IP67 according to IEC 60529 are fulfilled when assembled and inserted.

 

Sensor Actor Line / High Temperature Connectors

Sensor Actor Line / High Temperature Connectors

The demands for higher and of temperature resistance certainly don’t stop for industrial automation. For these kinds of application CONEC offers high temperature connectors, which can withstand 8000 hours at a constant temperature of +125°C – it can also withstand temporary peak values of up to 150°C over 2000 hours. The Food and Beverage industry has very special requirements regarding chemical and temperature resistance – also for the circular connector. Materials have been selected for CONEC F and B program which meet high hygienic requirements and which are resistant to common, harsh cleaning agents used in high pressure cleaning processes. Food and Beverage High Temperature Connectors from CONEC meet protection class IP69 K.


Grid List

Set Descending Direction

3 Item(s)

Grid List

Set Descending Direction

3 Item(s)

Contact Us